Industrial Flame Monitoring (IFM)

Remote touchscreen display that provides data on multiple signal processors/viewing heads flame status outputs.

Remote mounted UV viewing head that detects the presence of a flare stack flame to insure unburned toxic waste gasses are combusted and not released into the atmosphere.

Continuous operation, high energy spark Ignitor to directly ignite all gasseous fuels for smaller 1-3MMBtu/Hr Capacity.

Fiber Optics for UV, IR, or UV+IR flame detection to extend the viewing head's ability to better see the flame in the combustion chamber.

Single channel UV+IR Viewing Head to be used with P522/P531/P532 Signal Processors.

Single channel Viewing Heads available in UV or IR sensors used for gas or oil fired burners.

Single Channel, self checking, UV or IR Signal Processor with keypad

Dual channel UV and IR Signal Processor with integrated keypad and display that supports two switched viewing heads simultaniously.

Industrial grade all-in-one UV/IR self checking Integrated Viewing Head and Signal Processor that can be programmed to better discern flame signal strengths.

A comprehensive set of accessories is available to simplify mounting, commissioning and demonstration of IFM products

Rectifiation based signal processor to be used with Flame Rods to detect presence of a flame.

Remote PC software and touchscreen display for configuration and to provide data from multiple Signal Processors/Viewing Heads flame status outputs.